Quad Vena II

You’d be forgiven for wondering why Quad parent company IAG felt the need to upgrade its small-form Vena amp to Mk II status; after all, the original – launched back in 2014 – was good enough to take top honours in our mini-amp Group Test in November of that year (HFC 390), despite being one of the pricier models in contention.

It’s not hard to see why. The Vena was a fine mix of retro Quad styling and up-to-date facilities, echoing the company’s classic amps of the past while offering features such as Bluetooth wireless connectivity and a USB port to allow it to be connected straight to a computer. Above all it was rather good, our test back then noting that it “proves one of the most able performers in the group across all inputs because it doesn’t obviously sound like a compact audio product”. Yes, there were mentions of loose bass and rather two-dimensional stereo imaging, but it was acknowledged that by the standards of the competition the Vena still impressed and showed no signs of what was (by Quad terms, at least) a very modest price.

Fast-forward half a decade, and we have the Vena II – and at first glance it’s hard to see exactly what has changed. The little amplifier still comes in Quad’s understated Lancaster Grey as standard at £649, with optional (and substantial) wood sleeves in a choice of sapele mahogany veneer (pictured), or gloss black or white lacquer, adding a smidge to the minimal bulk and £100 to the price.

The controls, meanwhile, remain reminiscent of those on other classic Quad products of yore, such as the QII integrated and PA-One/VA-One (HFC 417): the Vena II may not have the valves of those offerings, but it’s unmistakably a Quad, and while some may feel the grey finish is a little dowdy, I think it gives the ‘basic’ version a more purposeful look that’s rather lacking from the slightly too retro wood-finished options.

Inside the Vena II, however, the changes are more marked, with both the digital and analogue sections heavily revised: out has gone the Cirrus Logic DAC chip – which limited it to 24-bit/192kHz – to be replaced by the ES9018K2M DAC. Part of ESS Technology’s Sabre32 Reference family, it allows the Vena II to push its digital compatibility all the way up to 32-bit/384kHz and DSD256 when connected to a computer via USB. The other digital inputs – two optical and one coaxial – remain limited to 24-bit/192kHz, which will likely prove no limitation to most users.

Far from just slapping in the Sabre DAC – which comes complete with ESS’ own jitter elimination circuitry, and leaving it at that – IAG’s engineers have also paid close attention to the implementation of the conversion, including the design of the post-conversion active filtering. The work in the digital section has been echoed in the analogue areas of the Vena II and while the same Quad-designed Class AB amplification found in the original remains, it’s now powered by a new 200VA toroidal transformer with generous reservoir capacity downstream of it, designed to enhance both the amplifier’s grip and dynamic ability.

Also new here is a low-noise JFET-based moving-magnet phono stage – acknowledging the increased interest in vinyl since the original Vena was launched – while the boom in headphone listening is also marked with enhancements in that area. The output was previously fed from the main amplifier circuit; now there’s a dedicated headphone amp using current-feedback circuitry for better dynamics and detail.

Otherwise, the Vena II demonstrates the same good design practice that’s seen in the 2014 version, with volume controlled by a high-quality ALPS motorised potentiometer, and close attention paid to circuit layout and power supply provision. The specification is completed by Bluetooth supporting aptX and AAC, and two line-level inputs in addition to the phono in, while outputs run to a single pair of speaker binding posts, optical and coaxial digital, a set of pre outs should you want to add a power amp and a compact remote handset for the usual functions. Small it may be, but the Vena II is comprehensively equipped.

Sound quality
The new version is comprehensively better than the amplifier that it replaces, which was itself no slacker. The bass is much tighter and better defined, offering decent extension, while the greater punch and dynamic ability is as much about detail and speed as all-out slam and the ability to play loud cleanly. If the original succeeded by not sounding anything like a small amplifier, the second-generation model takes that to a new level, making it an ideal hub for a stylish system even if you’re not limited for space.

Quad offers a ‘serving suggestion’ for the Vena II, combining it with a pair of its compact S1 standmount loudspeakers (HFC 404) in black ash as a System Pack selling for £999, but based on the performance it puts in in my listening room this amplifier is more than good enough to be used with more ambitious speaker choices. For a while I run it into Neat’s excellent Iota Xplorer floorstander (HFC 435), having already heard it performing well with the same company’s tiny original Iota in ‘desktop audio’ mode.

Tabletop audio is an application to which the Vena II’s dimensions make it very well suited, but despite its seemingly modest 45W per channel into 8ohm power output claim, it’s more than capable of delivering a big, room-filling sound, whether from vinyl, other analogue sources or a digital feed.

Playing the free-flowing one-take-recorded Raízes set from Breno Viricimo in DSD256 downloaded from nativedsd.com, the Quad does a fine job with the detail and air of the music, giving the bass natural weight and snap while letting the percussion patter away behind the lead guitar. And when one comes back into the real world with a CD-quality recording such as the massive After The Flood from Talk Talk’s 1991 Laughing Stock album, the Vena II’s combination of persuasive clout and detail retrieval takes you right into the heart of the textures of the track to magical effect.

Conclusion
With a comprehensive specification that moves Quad’s most compact integrated amplifier on and enough weight to bring any type of music to life so thrillingly, the Vena II continues to show that it really is something a little extra special. JP    

DETAILS
Product: Quad Vena II
Price: From £649
Origin: UK/China
Type: Integrated amplifier/DAC
Weight: 6kg
Dimensions: (WxHxD) 301 x 95 x 313mm

FEATURES
● Quoted power output: 2x 45W (8ohm)
● Digital inputs: 2x optical; 1x coaxial; 1x USB-B; aptX Bluetooth
● Analogue inputs: 2x RCAs; 1x MM phono stage
● Outputs: 1x optical digital; 1 coaxial digital; stereo pre; 6.35mm headphone socket

Read the full review in April 2019 issue 448

COMPANY INFO
IAG Ltd.(UK distributor)
01480 452561

X